Canuck Thermoplastic Compounds
100 Series - PE Blends
| Features: | Injection molding compounds |
|---|---|
| Forms: | Pellets |
| Colors: | Black, (Custom Colors) |
Typical Properties1 BK 1-4-0
| Physical | Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.94 | g/cm3 | ASTM D792 |
| Melt Flow Rate, MFR (190°C / 2.16 kg) | 1 | g/10 min. | ASTM D1238 |
| Mechanical | |||
| Tensile Strength @ Yield, 2 in/min | 2,100 | psi | ASTM D638 |
| Tensile Strain @ Yield, 2 in/min | 50 | % | ASTM D638 |
.
| Notes: | 1 Typical values only, not to be contrued as sales specifications |
|---|---|
| All values measured on samples conditioned at 23°C / 50% relative humidity | |
| All properties except MFR measured on injection modled specimens |
.